Outdoor wall solar powered sensor light with 38 LED and a detached solar panel is an advanced lighting product with multiple features. It is fully operated by solar energy with an efficient solar panel in combination with powerful 3000mAh rechargeable battery. The product designed for outdoor use and that does not require any additional electric wires or other sources of energy that. However, the solar panel can be detached from the light body with 2.5 meter cable to provide necessary flexibility in running the LED light. That makes this particular model of the lighting device extremely convenient for cases when the area where there is not sufficient sunlight to recharge the battery. The body can be installed separately from the solar panel that can be placed under direct sun. With this upgraded design feature, the motion sensor light can be installed in the warehouse, garage, garden, shed, house wall on a shade side, basement, under the shed and even indoor places.
Solar light has built-in automatic daylight sensor and also Smart PIR Motion Sensor with pickup range up to 8m. That combination allows running the product in various lighting modes including Motion Sensor only or in combination with DIM light all night, as an all-night light with 50% brightness to extend working hours.
Solar powered wall sensor light is easy to install by fixing to the wall or fence and operate. The device is a low-maintenance and cost-efficient Solar Product that provides outstanding performance without additional maintenance.
Outdoor wall solar powered motion sensor light’s 38 LED with Detached Solar Panel features:
- Powered by Solar Panel that makes it Eco-friendly and Energy-efficient products;
- Upgraded Detachable Solar Panel design with 2.5m extension cord to provide enough sunlight even at locations covered by shade.
- Bright LED performance provided by 38 LED bulbs up to 750 lumens and supplied with 3000mAh built-in rechargeable battery.
- 3 advanced lighting modes including
Motion Sensor Mode that delivers full brightness when activated by movement;
Motion Sensor Mode and DIM light provides lighting all night with full power on when activated;
Steady On Mode without any light until the motion is detected.
- Fully automated operation process with a built-in Special light-control system for day/ night mode detection.
- Smart Motion Sensor activated within the range up to 5-8m.
- Waterproof and heatproof: enhanced water and weather resistance IP65.
- Easy to install, setup and operate. Can be fixed to almost any surface including bricks, stucco, wood, metal, etc. with screws provided.
- No maintenance cost. User-friendly design, no wiring or any professional installation needed.
Ideal for: due to IP65 enhanced waterproofness it can be widely used for lighting up areas around a garage, basement, fence, patios, garden, yard, roof, stairway, driveways and other indoor and outdoor places. A detachable solar panel allows using the sensor LED light in shade areas, under the roof and even indoor.
For whom: for someone who is looking for a smart and efficient way organize and maintain lighting around a property in a complicated environment, for example, due to limited direct sunlight in a particular area or corner.
1 x 38 LED solar motion sensor light;
1 x 2.5m Extension cable;
1 x User manual;
1 x Accessories for installation.
How to set up outdoor wall solar sensor LED light:
1. Press Mode Button for 3 seconds, wait for light blinks 3 times, auto light in DIM mode is set and will be turned all time from dusk. It will turn into full brightness when motion is detected within 5-8 m., 25s after it will be automatically switched into weak lighting.
2. Press Mode Button; wait for light blinks 3 times, auto lights up is On in full brightness when motion is detected within the range. After 25s. it will completely turn off until next motion.
3. Press Mode Button; wait for light blinks 3 times, no motion mode is On. The light will be on all night with 50% brightness from dusk till morning or until the battery last. This is general light mode.
4. Press Mode Button again to turn the light off.
General maintenance tips on how to improve Solar Panel’s life and efficiency of outdoor solar wall motion sensor light:
- Solar Panel should be installed in a well-lit area where it can receive maximum straight sunlight during daytime. Any cover that shades the Solar Panel will affect its ability to absorb sunlight and as a result decrease a device’s performance.
- Clean the surface of the Solar Panel with a soft, slightly moistened cloth with soap and water or a dry brush only. Do not use any corrosive cleaning liquids or chemicals since this may damage the housing surface or impair future operation.
- Keep the Solar Panel free of dirt, debris and snow otherwise the battery will not charge properly or might also shorten battery life or cause a malfunction.
- It is recommended to place the product under the sun for recharging even it is not being used to prevent from a dead battery and maximize its life.
- In a case when the product is not being used for a long time, charge it for at least 10 hours by the sun before use.
* SPECIAL OFFER: discount applies automatically during the check-out process.